King Plate VI (Six) -
SK8KINGS Skid Plate
Prolong the life of your
decks with our SK8KINGS nose and tail guards. The King Plate
is designed to fit wider longboard, park and bowl decks
with a blunt edge -- ideal for old school vert boards.
Double drilled with countersink
bolt holes -- gives extra
life before you grind down to the bolt head. Super strong steel sex
bolt mounting hardware included. Hardy yet light with a beveled
edge for nice transition.
Dimensions: 9" x 1.69" x 3/8" thick
Colors: Black or White
skid plate sold individually with mounting hardware (enough for one nose
or one tail) finish color may vary from pictured depending on stock available. Order quantity of "2" if using
this size on both nose and tail of your deck. Also available as an upgrade
option to our SK8KINGS Decks and Completes.
Mounting Notes: The black cylinder nuts go from top to bottom through the deck (so the low profile head is nearly flush with the deck top) and the screws goes in through the bottom -- tightening into the black cylinder -- similar to the way a typical lock nut would work. This hardware is extra strong like that so perfect for mounting the plates. Lay the plate on the deck surface you will mount to - mark the deck surface through the center of drill holes - and then drill for the size of the black piece (drill bit size is 7/32). Tip - Use a pointed screwdriver or similar to make a slight indention on each drill hole to have a start point for your drill bit to grab. With deck secure - drill straight through. When it's mounted - the top will be basically flush and the screw heads will be recessed in the drill hole countersink underside of the plate.
Shipping Rates inquire by e-mail: firstname.lastname@example.org Rates
vary by country so please include your shipping address in e-mail.