King Plate I V.2
- SK8KINGS Skid Plate
Prolong the life of your
decks with our SK8KINGS nose and tail guards. The redesigned King
is a more streamlined version of
our original King Plate I. Designed to fit
the nose radius of the Primo
Slide, G-King & Jester decks
but also works great with our SK8KINGS street models (fits both nose
and tail) and most other standard street decks too.
with countersink bolt holes -- gives extra
life before you grind down to the bolt head. Super strong steel
t-nut mounting hardware included. Hardy yet light with a beveled
edge for good control.
Dimensions: 4" x 1 1/4" x 3/8" thick
skid plate sold individually with mounting hardware (enough for one nose
or one tail) finish color may vary from pictured depending on stock available. Order quantity of "2" if using
this size on both nose and tail of your deck. Also available as an upgrade
option to our SK8KINGS Decks and Completes.
Mounting Notes: The black cylinder nuts go from top to bottom through the deck (so the low profile head is nearly flush with the deck top) and the screws goes in through the bottom -- tightening into the black cylinder -- similar to the way a typical lock nut would work. This hardware is extra strong like that so perfect for mounting the plates. Lay the plate on the deck surface you will mount to - mark the deck surface through the center of drill holes - and then drill for the size of the black piece (drill bit size is 7/32). Tip - Use a pointed screwdriver or similar to make a slight indention on each drill hole to have a start point for your drill bit to grab. With deck secure - drill straight through. When it's mounted - the top will be basically flush and the screw heads will be recessed in the drill hole countersink underside of the plate.
Shipping Rates inquire by e-mail: email@example.com Rates
vary by country so please include your shipping address in e-mail.